6
1. Locate the water filter under the undercarriage of the product
(fig. 8)
.
2. The filter is connected to the water tank via a push-in connector for ease of service. Push the
connector ring and pull out the water filter hose from the push-in connector.
3. The filter is connected to the water pump via a hose barb connector. Pull the water filter hose from
the hose barb connector.
4. Dispose of old filter. Always dispose of waste according to local law.
5. Push the hose into the push-in connector to connect the filter to the water tank.
6. Push the hose onto the hose barb connector to connect the filter to the water pump.
CAUTION:
DO NOT USE GASOLINE, THINNER, ALCOHOL, SOLVENTS OR OTHER HARSH
CLEANNERS OR CHEMICALS TO CLEAN THE PRODUCT. THEY WILL DAMAGE THE PRODUCT.
•
Empty all water from the water tank.
•
Clean the unit with a soft cloth and mild soap solution.
•
Dry all parts completely.
•
Store the product in a clean and dry place.
EMPTYING WATER TANK
•
Unplug the product from the power supply.
•
Position the product in a location where water can drain out.
•
Unscrew the drain plug.
•
Allow all water to drain from the tank.
•
Replace the drain plug and tighten.
CONDITIONING WATER TANK
Conditioning the water tank ensures that the cooling system will operate at optimal levels throughout the
life of the system. If the product produces musty-smelling cooling:
•
Completely drain water tank. (See Emptying Water Tank)
•
Add drops of unscented chlorine bleach to about 2 gallons of CLEAN WATER (approximately 5 drops
per gallon of water) and pour into water tank.
•
Run the cooling system.
•
The system is conditioned and ready for operation.
Storage
