5
Cooling ON
1. Ensure the drain plug is in place and tightened
(fig. 4)
.
2. Open and fill water tank with clean water, then replace water cap
(fig. 5)
.
3. Press the fan switch to the ON position
(fig. 2)
. Allow the fan to run for 30 seconds.
4. Turn on the cooling function by pressing the cooling switch to the ON position
(fig. 6)
.
Cooling OFF
1. The cooling function can be turned off independently from the fan by pressing the cooling switch
to the OFF position
(fig. 7)
.
2. Pressing the fan switch to the OFF position will turn off all functions
(fig. 3).
Note: Unit will continue to atomize for a short time while the unit depressurizes.
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
WARNING:
ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING THE
PRODUCT.
DO NOT IMMERSE THE PRODUCT IN WATER!
REPLACING WATER FILTER
WARNING:
ANY SERVICING OF THIS UNIT, EXCEPT FOR GENERAL MAINTENANCE DESCRIBED
IN THIS SECTION, SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
CAUTION:
The filter has been designed to provide optimal system performance by catching any
debris that may enter the supply lines throughout use. Semiannual replacement of the water filter
ensures the life of your system.
Maintenance
