Cuizimate RBSPROFESSIONALBLENDER, Instruction Manual

Page: 13 / 16

5.
6.
7.
8.
to HIGH (or dial the Variable
switch to get more power).
At the same time, holding the
muddler continuous stir and
point toward the side or corner
of the container to push ingredients
into the blades.
If your machine is microcomputer
series, you can activate the
timer by selecting the desired
timer setting on the control panel
and then blender will shut off
automatically at the end of the
pre-set time.
After the blender has been
stopped, wait until the blades
comes to a complete stop before
removing the lid or container
from the motor base.
To use the Pulse Switch to refresh
drinks : Make sure the power is
OFF. With the container on the
motor base, depress the Pulse
Switch. Release the switch to
stop the motor.
Press the ON/OFF switch to
OFF when not in use.
12
After use cleaning
Add 1 cup of hot water and a
drop of liquid dishwashing soap
to the blender jar.
Place the lid tightly onto the
jar. Place the blender jar on the
blender base, and with your
hand placed on top of the lid
; press the Pulse Switch for 5
seconds.
Rinse with clear water until all
soap is rinsed from jar and lid.
Clean the blender base by simply
wiping the base and touchpad
with a damp rag and water.
Cleaning tips and cautions
Do not use abrasives or stiff
brushes to clean the blender base
or jar as this will dull or scratch
the surface. Appearance damage
is not covered by Warrant.
Never submerge the blender
motor in water. Avoid submerging
blender jars for more than 5 minutes.
Water penetration through the
lower jar seals will reduce the
life of the jar. After cleaning,
We recommend the blender jar
be stored upright.
1.
2.
3.
4.
1.
2.
Cleaning and care