background image

2

IMPORTANT SAFEGUARDS

PLEASE READ CAREFULLY ALL INSTRUCTIONS BEFORE USING YOUR 10-SPEED BLENDER 

This product is intended for use in blending food products. 

 Do not use this appliance for any other purpose other than intended.

WARNING

: To avoid risk of electrical shock, burns or injuries, always make sure the product is 

unplugged  from the electrical outlet before displacing, servicing or cleaning it.

When using any Blender and to reduce the risk of fire, electrical shock, burns or serious 

injury, basic safety precautions should always be followed:

1.  Before using this appliance, please check carefully to make sure voltage (AC120V-60Hz) is 

compatible with your home and that electrical cord is connected to a properly grounded 

electrical outlet of similar voltage. 

CAUTION

: Risk of fire, electric shock, burns or injury if 

Blender is not connected as instructed.   

2.

  ALWAYS

 place appliance on a flat, level and stable surface.

3.  Make sure Blender and all controls are in 

OFF

 position before inserting plug in electrical 

outlet.

4.  Do not plug/unplug Blender into/from electrical outlet with wet hands.
5.  To disconnect Blender from electrical outlet, pull directly on the plug; do not pull on the 

power cord.

6.

  DO NOT

 let power cord hang over edge of table or counter or touch any hot surfaces. 

7.

  DO NOT 

place or use the unit or any parts on or near a hot gas or electric burner, in a 

heated oven, or on stove top. 

8.  This appliance should not be used by or near children, or persons with certain disabilities. 
9.  This product is equipped with a polarized plug (one blade is wider than the other 

blade) as a safety feature to reduce the risk of electrical shock and fire. This plug will fit 

into a polarized outlet only one way. If you are unable to insert the plug into the electrical 

outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician. 

Never use the plug with an extension cord unless the plug can be fully inserted into the 

extension cord, making sure the electrical rating of the extension cord is at least as great as 

the electrical rating of this appliance (listed on the bottom panel of the unit). Do not alter 

plug. Do not attempt to defeat the safety purpose of the polarized plug.

10.

  DO NOT

 operate this or any other appliance with a damaged cord or plug or after 

the appliance malfunctions, has been damaged in any way or if Base/Motor has been 

immersed in water or other liquid. Send the unit to the nearest Authorized Service Center 

for inspection, repair or adjustment. (ONLY qualified technicians should repair the unit).

11.

  To avoid risk of electrical shock, fire or injuries: DO NOT immerse in or expose Base/

Motor, electrical cord or plug to water or other liquid.

12.  A short power-supply cord is provided to reduce the hazards resulting from entanglement 

or tripping over a longer cord. An extension cord may be used with care; however, be sure 

the marked electrical rating is at least as great as the electrical rating of this appliance 

(listed on the bottom panel of the unit). The extension cord should be positioned such that 

it does not drape over the counter or table top where it can be pulled on by children or 

tripped over. 

DO NOT

 use an outlet or extension cord if the plug fits loosely. 

DO NOT

 use 

extension cord if electrical cord feels hot.

Summary of Contents for CBL-1048








Reviews: