8
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should
always be followed, including the following:
1.
READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put motor
base of blender in water or other liquid.
3. This appliance should not be used by or near children or
individuals with certain disabilities.
4. Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning or removing contents
from blender jar.
Never put hands into the blender jar or
container, or handle the blades with appliance plugged in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged
in any manner. Return appliance to nearest Cuisinart
®
service
facility for examination, repair, and/or mechanical or electrical
adjustment.
7. The use of attachments, including canning or ordinary jars, not
recommended or sold by Cuisinart
®
may cause fire, electrical
shock, or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch
hot surfaces.
10.
Keep hands and utensils out of jar while blending, to
reduce the risk of severe injury to persons or damage to
blender itself.
A rubber or plastic spatula may be used but
must be used only when the blender is turned off.
11. When blender is in ON mode, and LED lights are flashing or
glowing, do not touch cutting assembly, interfere with blade
movement, or remove blender jar cover. Accidentally touching
a speed button may activate the blender.
12.
BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on
base unless the blender jar is properly attached.
14. Always operate blender with the cover in place.
15. Never leave your blender unattended while running.
16. When blending HOT liquids, remove measured pour lid (center
piece of cover) to allow steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may
result in fire, electrical shock, or personal injury.
Regarding your cord set:
A longer cord has been provided
so that you will have flexibility in positioning your Cuisinart
®
SmartPower Blender near an electrical outlet. Exercise care
when using the longer cord, to avoid entangling or tripping
over the cord. The longer cord should be arranged so that it
will not drape over the counter or tabletop, where it can be
pulled on by children or tripped over. Excess cord should be
stored in the cord storage area at the back of the blender base
to avoid injury caused by the longer cord.
19. Wash the blender jar, cutting assembly, locking ring, and cover
before first use.
20.
WARNING:
TO REDUCE THE RISK OF ELECTRICAL
SHOCK OR FIRE, DO NOT REMOVE THE BASE PANEL.
NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR
SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
21.
WARNING: FLASHING LIGHT INDICATES BLENDER IS
READY TO OPERATE. DO NOT TOUCH BLADES.
22. Children should be supervised to ensure that they do not play
with the appliance.
23 This appliance is not intended for use by persons (including
children) with reduced physical,sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Summary of Contents for SPB-7CHCN Series
Page 1: ...Instruction Booklet Cuisinart SmartPower 7 Speed Electronic Blender SPB 7CHCN Series...
Page 3: ...3 2 2 3 4 4 4 5 5 6 6 7 1 2 60 3 1 2 4 5 6 7 8 7 8a 8b 9 10 2 1 3 5 6 7 8 9 8a 8b...
Page 4: ...4 d a b c Cuisinart 1 a 2 b 3 c 4 d 5 6 7 1 3 5 1 Cuisinart Cuisinart 2 3 4 5 6 15...
Page 5: ...5 1 2 7 8 9 10 15...
