Cuisinart SmartPower HTM-3, Instruction And Recipe Booklet

Page: 4 / 21

uSE aNd CaRE
inserting Super-Sized Beaters
1. Set the speed control to OFF and
unplug the mixer.
2. Insert beater with collar into larger hole.
Push beater in until it clicks into place.
Insert the beater with no collar into the
smaller hole. Push beater in until it
clicks into place.
Cleaning and Removing
Super-Sized Beaters
1. Before cleaning the SmartPower
™
Hand
Mixer, set the speed control switch to OFF
and unplug it from the wall outlet. Pull up
on the beater release trigger and remove
beaters from the mixer. Wash the beaters
after each use in hot, soapy water or in a
dishwasher.
2.
NEVER PuT THE MOTOR HOuSiNG
iN WaTER OR OTHER liQuid TO
ClEaN. Wipe with a damp cloth or
sponge. Do not use abrasive cleansers,
which could scratch the surface.
QuiCK
REFERENCE CHaRT
Mixing Techniques
The SmartPower
™
Hand Mixer should
always be set on the lowest speed when
you start mixing.
Speed 1/ Low Speed
• Start mixing most ingredients together
• Combine dry ingredients
• Cream butter and sugar
• Mix heavy cookie doughs
• Mash potatoes/squash
• Add nuts, chips, dried fruit to doughs
and batters
• Add flour to batters, or liquids to dry
ingredients
• Start mixing frostings
• Start mixing cake mixes
Speed 2/ Low Speed
• Add eggs to batters/doughs
• Whip potatoes/squash
• Mix pudding batters
Speed 3/ Medium Speed
• Complete beating cake mixes
• Mix scratch cake batters
• Complete mixing frostings
• Whip potatoes/squash
• Beat whole eggs/yolks
• Start whipping cream
Speed 4/
High Speed
• Complete whipping cream
Speed 5/ High Speed
• Whip egg whites
4
Larger
Hole