2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should
always be followed, including the following:
1.
READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put
motor base of blender in water or other liquid.
3. Close supervision is necessary when any appliance is used by
or near children.
4. Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning or removing contents from
blender jar.
Never put hands into the blender jar or container, or
handle the blades with appliance plugged in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in any
manner. Return appliance to nearest Cuisinart service facility for
examination, repair, and/or mechanical or electrical adjustment.
7. The use of attachments, including canning or ordinary jars, not
recommended or sold by Cuisinart may cause fire, electrical shock,
or risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch
hot surfaces.
10.
Keep hands and utensils out of jar while blending, to
reduce the risk of severe injury to persons or damage to
blender itself.
A rubber or plastic spatula may be used but must
be used only when the blender is turned off.
11. When blender is in ON mode, and LED lights are glowing, do
not touch cutting assembly, interfere with blade movement, or
remove blender jar cover. Accidentally touching a speed button
may activate the blender.
12.
BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on
base unless the blender jar is properly attached.
14. Always operate blender with the cover in place.
15. Never leave your blender unattended while running.
16. When blending HOT liquids, remove measured pour lid (center
piece of cover) to allow steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may
result in fire, electrical shock, or personal injury.
Regarding your cord set:
A longer cord has been provided so that
you will have flexibility in positioning your Cuisinart
®
SmartPower
Classic
™
Blender near an electrical outlet. Exercise care when using
the longer cord, to avoid entangling or tripping over the cord. The
longer cord should be arranged so that it will not drape over the
counter or tabletop, where it can be pulled on by children or
tripped over. Excess cord should be stored in the cord storage area
at the back of the blender base to avoid injury caused by the
longer cord.
19. Wash the blender jar, cutting assembly, locking ring, and cover
before first use.
20.
WARNING:
TO REDUCE THE RISK OF ELECTRICAL SHOCK
OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER
SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE
DONE ONLY BY AUTHORIZED PERSONNEL.
21.
WARNING:
FLASHING LIGHT INDICATES READY TO
OPERATE. DO NOT TOUCH BLADES.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE:
This appliance has a polarized plug (one prong is wider than the other).
To reduce the risk of electric shock, this plug will fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
