8
ASSEMBLY
BLENDING ATTACHMENT
Align the motor body housing with the blending shaft and push the
pieces together until you hear and feel them click and connect. If they
don’t easily connect, just pull the housing and blending shaft slightly
apart, rotate the shaft a little, push the pieces together again and
listen for the click.
WHISK ATTACHMENT
1. Align the end of the whisk (A) with the
small opening of the whisk gearbox (B).
2. Push end into opening until it locks into
position (C).
3. Align the motor body with the whisk
assembly and push the gearbox and
motor body together until you hear and
feel them click and connect. If they don’t
easily connect, just pull the housing and
blending shaft slightly apart, rotate the
shaft a little, push the pieces together
again and listen for the click.
CHOPPER ATTACHMENT
1. Connect the motor body housing to the top of the work bowl
cover.
2. Align the spine in the chopper cover’s drive shaft with the ribbed
opening on the
underside ofthe motor body housing.
3. When aligned properly, slide the two pieces together until you
feel and hear a slight click.
B
C
A
Fig 1
Fig 2
Fig 3
