B.
BLUNT SIDE UP
10
If you hold it this way (B), you will see no writing on the blade.
Assemble the blade this side up to use the blunt edge. (See
the section on processing food, page 14, for information about
when to use the blunt edge.)
OPERATION
BLENDINg
The specially designed blade is for mixing and puréeing all kinds of
foods, including salad dressings, powdered drink products, soups and
sauces and blended drinks like milkshakes or smoothies.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the
most flavorful, full-bodied recipes. Be careful never to remove the
blending shaft from the liquid while in operation, for it will splatter.
Tilt the pan or bowl away from you if needed to ensure the protective
blade guard on the blending shaft is fully submerged.
1. Put blending shaft into mixture to be blended.
2. Press and hold the desired speed button. The hand blender will
continue to run as long as the button is pressed in. To turn hand
blender off, release the Power button and the motor will stop.
3. Do not press the button for longer than 60 seconds at a time.
4. Unplug immediately after use.
CAUTION: DO NOT PUT FINgERS NEAR BLADE.
TO DISLODgE FOOD, UNPLUg HAND BLENDER
FROM THE OUTLET FIRST.
PULSINg
To pulse, press and release desired speed button.
CHOPPINg FOOD
1. Place the work bowl firmly on a flat, sturdy surface like a
countertop.
2. Put food in the work bowl. Be sure the food is cut into small
pieces (½ to 1 inch), and the bowl is not overloaded.
3. Put the work bowl cover on top of the work bowl. Be sure the
cover is properly seated.
4. Press and hold the desired speed button.
Summary of Contents for Smart Stick CSB-79
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
