background image

4

5

ASSEMBLY

To use your Cuisinart

®

 ReMix6.0 600-Watt Blender, 

begin by assembling the blender jar. 
1.   Turn the blender jar (a) upside down, and place it 

flat on a sturdy surface. 

Note:

 You may need to position the rubber gasket  

(b) into the groove of the blade assembly if not  

tightly in place.

2.   Turn the blade assembly (c) upside down, and 

place the blade end in the blender jar opening.

Note:

 Blades are sharp… handle carefully.

3.  Twist blade assembly (c) clockwise until secure.

HELPFUL REMINDERS

•   Once the cover is in position, additional 

ingredients can be added during blending by 

simply lifting the measured pour lid, adding ingre-

dients, and replacing the measured pour lid.

•  

Cover should always be in place while the unit is 

on.

•  

Warning:

 Do not place blender jar on base while 

motor is running.

•   Do not remove blade assembly from blender jar 

when removing blender jar from base. Simply lift 

blender jar from motor base.

•  

Boiling liquids or solid frozen foods (with the 

exception of ice cubes or ½-inch [1.3 cm] pieces of 

frozen fruit) should never be put into the blender jar. 

•   Do not put ice, frozen foods or very cold liquids 

into a blender jar that has come directly from a 

hot dishwasher.

•   Do not put very hot liquids or foods into a blender 

jar that has come directly from the freezer. Boiling 

liquids should cool for 5 minutes before being 

poured into blender jar.

•   Follow Cleaning and Maintenance instructions on 

page 6, prior to your first use.

OPERATION

1.   Place the motor base of your Cuisinart

®

 ReMix6.0 

600-Watt Blender on a flat, sturdy surface. 

It is important that the surface be clean and 

dry. Assemble the blender jar by following the 

Assembly Instructions. Once the jar is assembled 

and is in position on the motor base, plug the unit 

into an electrical outlet.

2.   Put all necessary ingredients into the blender 

jar and replace the cover. You may add more 

ingredients by lifting the measured pour lid and 

dropping ingredients through the fill area. Replace 

the measured pour lid after adding ingredients. Do 

not put hands into blender jar with blender plugged 

in.

 

Note:

 Add liquid ingredients first, then follow  

with solid ingredients. This will provide more  

consistent blending and prevent unnecessary 

stress on the motor.
 

Note:

 To remove blender jar cover, lift edge of 

cover upward. Lifting measured pour lid will not 

remove cover.

3.  

Start blending:

  

Press the I/O button. The red LED  

indicator light will illuminate and flash,  

indicating that the blender is turned on but  

no speed has been selected.

4.  

Choose blending speed:

 Press High, Low or Ice 

Crush buttons to determine the speed at which 

you would like to blend the ingredients. Both the 

On (I/O) indicator light and the activated speed 

indicator lights will glow. The blender will now be 

functioning at the desired speed. It is possible to 

switch speeds without pressing the I/O button, by 

simply pushing another speed button.

WARNING:

 FLASHING RED LIGHT INDICATES 

READY TO OPERATE. DO NOT TOUCH BLADES.
 

Pulse mode:

  

The Pulse mode allows you to create a burst of power 

for quick, efficient blending. To use the Pulse function, 

push the I/O button and the red LED indicator light will 

illuminate. Push the Pulse button and the blue Pulse LED 

indicator light will blink. Push and release the desired 

speed button. Repeat as desired. You determine the 

duration of each pulse. While pulsing, the blue LED  

indicator light will glow. The Pulse function can be used 

to break apart larger pieces of food or to control the  

texture of food when chopping. The Pulse function is 

also effective in starting the blending process when  

you do not want continuous power, or when  

processing items that do not require an extended 

amount of blending.

  

FEATURES AND BENEFITS

1. Cover 

 

 Just press on. Tightfitting seal resists leakage.

2.   Measured Pour Lid 

 

 Allows you to measure and add ingredients 

without removing the cover.

3.  48-oz. (1.25 L) BPA Free Tritan

®

  

Co-polyester Jar

 

 Has a unique, sturdy, wide-mouth design. 

4.   High-quality Blade Assembly with Patented 

Stainless Steel Blades

 

Is strong enough for all blending tasks,  

including tough jobs like crushing ice.

5.   Electronic Touchpad Controls

a. 

 I/O  Button

 

Turns blender on or off.

b. 

 High  Button

 

Choose High speed to blend ingredients to 

the desired consistency. Blue LED lights will 

indicate which speed you are using.

c. 

 Low  Button

 

Choose Low speed to blend ingredients to 

the desired consistency. Blue LED lights will 

indicate which speed you are using.

d.   Ice Crush Button

 

Press Ice Crush and begin crushing. This 

button is pre-programmed and will stop 

blending when cycle is complete.

e. 

 Pulse  Button

 

Allows you to pulse at High or Low speeds, 

so you can blend ingredients only as much 

as needed. 

6.  Powerful Motor Base

  

Power to handle a wide variety of blending tasks. 

7.   Slip-proof Feet (not shown)

 

 Prevent movement during use and prevent 

damaging marks on countertops or tables. 

8.  Cord Storage (not shown)

 

 Keeps countertop safe and neat by  

conveniently storing excess cord.

*

Tritan is a registered trademark of Eastman Chemical 

Company.

Note: Blades are sharp. 

Handle carefully.

2.

6.

5.

1.

3.

4

.

8.

7.

c.

a.

b.

Summary of Contents for ReMix6.0












Reviews: