background image

6

INSTALLING THE LP GAS CYLINDER (TANK) ONTO THE GRILL:

 

1.  

Check that the cylinder valve is closed by turning the knob clockwise. Inspect cylinder valve rubber seal 
for cracks or deterioration. Do not use propane tank with damaged seal as a gas leak may occur.

2.  Place the cylinder into the cart as shown. 

• 

Inspect the propane tank valve rubber seal for cracks, 
wear or deterioration prior to use. A damaged rubber 
seal can cause a gas leak, possibly resulting in an 
explosion, fi re or severe bodily harm.

• 

Inspection should be done each time the propane tank 
is connected to the grill, has been refi lled, exchanged or 
has not been used for more than 60 days.

• 

Do not use a propane tank with a damaged rubber seal. 
Exchange the tank or have the rubber seal replaced at a 
qualifi ed propane fi lling station.

LP GAS CYLINDER (TANK) RUBBER SEAL INSPECTION:

Good
Rubber Seal

Damaged 
Rubber Seal

HOSE & REGULATOR SPECIFICATIONS AND INSTALLATION:

• 

DO NOT attempt to connect grill, as purchased for LP (propane) gas, to any other fuel supply 
source such as a natural gas line. For dual fuel grills that can be converted to natural gas, a 
3 Embers conversion kit must be purchased and installed for use with natural gas. 

• 

DO NOT use any other pressure regulator/hose assembly other than the one supplied with your grill. 
Replacement pressure regulator/hose assembly must be part No 0256-155-7600-0, which can be 
obtained by contacting customer service at 1-866-212-3150.

• 

DO NOT attempt to adjust or repair a regulator. The regulator is designed to operate at a 
maximum output pressure of 11 inches of water column (2.74 kPa).

• 

Ensure the tank valve is 

CLOSED

 prior to connecting the LP gas cylinder to your grill. Turn the 

valve knob clockwise to properly close the valve. Read and follow all instructions and warnings 
on the supply hose safety tags. Read and follow all warnings in this manual concerning the safe 
use of LP gas cylinders and the hose and regulator before connecting cylinder to grill. Read and 
follow all warnings on the LP cylinder.

WARNING

Summary of Contents for GAS0256AF




















Reviews: