background image

1

WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE.

THE PURPOSE OF THIS SAFETY ALERT SYMBOL 

 IS TO ATTRACT YOUR ATTENTION 

TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR GRILL.

WHEN YOU SEE THE SAFETY ALERT SYMBOL 

 

PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! 

 

 READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY

BEFORE ASSEMBLING AND OPERATING YOUR GRILL.

DANGER

IMPORTANT SAFETY

WARNINGS

IF YOU SMELL GAS:

1.  Shut off gas to the appliance.

2.  Extinguish any open fl ame.

3. Open 

lid.

4.  If odor continues, keep away from the appliance and immediately call your gas supplier or your 

fi re department.

1.  Do not store or use gasoline or other fl ammable liquids or vapors in the vicinity of this or any 

other appliance.

2.  An LP cylinder not connected for use shall not be stored in the vicinity of this or any other 

appliance.

 

 

 

a)  Do not store a spare LP cylinder under or near this appliance.

   b) 

Never 

fi ll the cylinder beyond 80% full.

 

 

 

c)  If the information in (a) and (b) is not followed exactly, a fi re causing death or    

 

 

 

serious injury may occur.

WARNING

DANGER

Summary of Contents for GAS0256AF




















Reviews: