Cuisinart DGB600BCU, Instruction Booklet

Page: 9 / 21

9
B Setting the Programme Time
This feature allows you to pre-programme brewing for the desired time. By pressing the ’Programme’ but-
ton the digital display shows the current program time. This default setting is 12.00pm.
Entering “Set Programme Time” mode:
Press and hold the “Programme Set” button until the green light and LCD display begin to fl ash, this si-
gnals that you have entered the “Set Programme Time” mode. The desired time can be set by pressing
the “Hours” and “Minutes” buttons to scroll forward through the digits. The buttons can be held down
to scroll through the digits or pressed and released lightly to advance one digit at a time. Once set, press
‘programme’ again, the coffee maker will start to brew at the programmed time.
N.B. The “Programme” mode cannot be entered if the coffeemaker is in a “brew” cycle.
Exiting “Set Programme Time” mode:
There are 2 ways to exit the “Set Programme Time”:
ß
Press the “Programme” button, the time entered will be set and the coffeemaker will revert to its pre-
vious state. If it was OFF, it will return to the OFF position. If “Programmed” it will revert to this state,
and so on. This is a safety feature.
ß
Press any other button (except “Hours” or “Minutes”). “Set Programme Time” mode will be exited and
the function of that button will be activated. No programmed time will be set.
ß
Leave the control. If neither “Hours” nor “Minutes” button is pressed for a period of 5 seconds, the “Set
Programme Time” mode will be exited automatically, no programmed time will be set.