Cuisinart DGB600BCU, Instruction Booklet

Page: 10 / 21

10
Inserting the Charcoal Water Filter
N.B. Your appliance is supplied with two charcoal water fi lters.
It is strongly recommended that the water fi lter is replaced after 90 days or 90 uses; more often if you have
hard water. Failure to do so can lead to a build-up of limescale and affect the performance of your appliance.
Replacement fi lters can be purchased directly from the manufacturer, (see “UK After Sales Service”section
for further details).
ß
Remove the fi lter from its packaging and soak in cold tap water for 15 minutes.
ß
To remove the water fi lter holder, simply lift it out from its opening on the inner wall of the reservoir.
ß
Hold stem in one hand. With your other hand, gently press the compartment door down and pull outwards
to fl ip open.
ß
Place the fi lter in the holder and close the compartment cover; you will hear a snap indicating fi lter is in
place. N.B. Caution must be used when inserting the charcoal fi lter. Improper placement in the holder can
cause tearing of the fi lter skin.
ß
Hold the fi lter under cold running tap water for 10 seconds to fl ush. Hold the water fi lter holder horizon-
tally, directly under the water stream so that the water fl ows through the fi lter compartment.
ß
Allow the fi lter to drain completely.
ß
Replace the water fi lter holder into its opening on the inner wall of the reservoir, pushing it all the way
down to the base of the unit.