4
Ignition
NOTE: Upon initial use, the torch requires gas charging
(see Refilling Gas, page 5). Please use high quality
butane (gas used in lighters).
1 . Center the gas adjustment dial between the “-“ and “+” signs .
2 .
Release the child-resistant latch by using your thumb and sliding it down
and make sure the latch is locked .
3 .
To light the torch: Hold the torch in your hand and use your thumb to press
and hold down the trigger . (It may take two or three tries before the torch
ignites .) Each try will require sliding down the child-resistant latch, then
pressing trigger again . Flame remains on as long as the trigger is held
down .
Trigger
Gas (Flame)
Adjustment
Gas
Filling Valve
(not shown)
Child-
Resistant
Latch
Removable
Stand
