STEP 16
-----------------------------------------------------------------------------------
Increase the length of the expanding drain hose by pulling the lower open end of the tube while holding firm
the top end that is pressed onto the threaded adaptor. Next position a bucket (not included) close by and
place the end of the expanded hose into the bucket. This bucket will serve to catch the waste water.
STEP 17
-----------------------------------------------------------------------------------
Screw the end of the water supply hose onto a garden hose that is attached to a water supply source. Make
sure the faucet is off and turn on the garden hose and check for leaks. If there are leaks turn off the garden
hose, tighten the leaking fittings and repeat this step until are seals are tight and not leaking.
CONNECTION INSTRUCTIONS
14
Summary of Contents for CGWM-090
Page 4: ...EXPLODED VIEW 4...
