19
20
The housing base is made of a tough plastic
with high impact resistance. Its smooth surface
will look new for years. Keep a sponge handy as
you work, and wipe spills from the base.
Four rubber feet on the underside keep the
base from moving on most work surfaces when
the machine is processing heavy loads. If the
feet leave spots on the counter, spray them
with a spot remover and wipe with a damp
sponge. If any trace of the spot remains, repeat
the procedure and wipe the area with a damp
sponge and nonabrasive cleaning powder. Dry
completely.
To clean the inside of the detachable stem, slide
the stem release button on the side up as far
as it will go and hold it there as you run water
through the stem.
IMPORTANT:
Never store any blade or disc
on the motor shaft. No blade or disc should be
placed on the shaft except when the processor
is about to be used.
Maintenance:
Any other servicing should
be performed by an authorized service
representative.
FOR YOUR SAFETY
Like all powerful electrical appliances, a Premier
Series 11 Cup (2.6 L) Food Processor should
be handled with care. Follow these guidelines
to protect yourself and your family from misuse
that could cause injury.
Handle and store metal blade and discs
carefully. Their cutting edges are very sharp.
Always place discs on flat, stable surface before
connecting detachable stem.
Never put blade or discs on the motor shaft until
the work bowl is locked in place.
Always be sure that the blade or disc is down
on motor shaft as far as it will go.
Always insert chopping blade in the work bowl
before putting ingredients in bowl.
When slicing or shredding food, always use the
pusher. Never put your fingers or spatula into
feed tube.
Always wait for the blade or disc to stop
spinning before you remove the pusher
assembly or cover from the work bowl.
Always unplug the unit before removing food,
cleaning, or putting on or taking off parts.
Always remove work bowl from base of machine
before you remove chopping blade.
Be careful to prevent the chopping blade from
falling out of the work bowl when emptying the
bowl. Remove blade before tilting bowl, or hold
it in place with your finger, a spatula or a spoon.
TECHNICAL DATA
The motor in your food processor operates on
standard line operating current. The appropriate
voltage and frequency for your machine are
shown on the lower housing under the base.
An automatic, temperature-controlled circuit
breaker in the motor ensures complete
protection against motor burnout. If the
processor runs for an exceptionally long time
when chopping, mixing or kneading a thick or
heavy mixture in successive batches, the motor
may overheat. If this happens, the processor will
stop. Turn it off and wait for
the motor to cool before proceeding. It will
usually cool within 10 minutes. In extreme
cases, it could take an hour.
Safety switches prevent the machine from
operating when the work bowl or the cover
is not locked into position. The motor stops
within seconds when the motor is turned off,
and a fast-stop circuit stops it when the pusher
assembly is removed.
Recipes
Appetizers
21
Soups
24
Quick Breads
26
Yeast Breads
28
Entrées
32
Pizzas
35
Sauces and Dressings
38
Sides
41
Desserts
44
