BEFORE THE FIRST USE
Remove all packaging and any promotional labels
or stickers from your Cotton Candy Maker. Be
sure that all parts (listed in Parts and Features) of
your new cotton candy maker have been included
before discarding any packaging materials. You
may want to keep the box and packing materials
for use at a later date.
Before using your Cuisinart
®
Cotton Candy Maker
for the fi rst time, wipe housing with a damp cloth to
remove any dust from the warehouse or shipping.
IMPORTANT NOTICE
When lifting cotton candy maker from table or
countertop, do not use cone holders located on
each side of unit. Cone holders are for storage only.
To lift safely, place one hand on each underside
of the cotton candy maker and lift upward to
release suction feet.
OPERATING INSTRUCTIONS
1.
Set the fully assembled motor base on a
stable and level surface.
2.
Connect plug to a power source.
3. Make sure fl oss head is in position.
4.
Switch the cotton candy maker to ON and
preheat for 5 minutes.
NOTE:
It is very important that you preheat the
cotton candy maker for the full 5 minutes.
5.
Switch OFF the cotton candy maker.
Add 1 scoop of sugar mixture into the
fl oss head.
CAUTION:
Floss head will be
extremely hot. Never touch fl oss head while
unit is on. After use, allow fl oss head to cool
for 30 minutes before touching or removing.
6. Turn unit to ON position.
7.
Use plastic cone to roll the cotton candy up.
Roll from right to left in a continuous motion.
Do not touch the fl oss head as you roll, as
the head is very hot and will cause fl oss to
burn. Continue rolling, evenly distributing
the cotton candy onto the cone.
8.
Cotton candy may be made in consecutive
batches. If unit is turned off for an extended
time, it must be reheated for 5 minutes.
9.
Do not use sugar cubes or liquid sugar
when making cotton candy.
CLEANING AND
MAINTENANCE
1.
Make sure that the power is off and the
appliance is not connected to a power source.
2. Allow the Cuisinart
®
Cotton Candy Maker
to cool for a minimum of 30 minutes before
disassembling and cleaning.
3. Remove the splash guard and bowl, and
disassemble to wash separately.
NOTE:
To remove splash guard from the
bowl, carefully grasp the splash guard from the
highest point and lift upward to release the
locking latches.
4. Remove the fl oss head, wash with warm water.
Any other servicing should be performed by
an authorized service representative.
6
