12
13
ASSEMBLY INSTRUCTIONS
12
ASSEMBLY INSTRUCTIONS
12
13
b. Position the Infrared Zone burner (DD)
through the opening in the Infrared support
frame (DC).
a. Remove the pre-assembled hardware from the
infrared side burner windshield (DL). Use the
hardware to assemble the infrared side burner
windshield (DL) to the infrared support frame
(DC), as shown in figure A.
c. Make sure that the Infrared Zone burner (DD)
engages the Infrared Zone burner valve (CC),
gas jet, as shown in figure C.
d. Assemble the Infrared Zone burner (DD) to the
Infrared Zone support frame (DC),
at the 2 points indicated in figure D.
e. Feed the Infrared Zone electrode wire (DE) from
underneath the Infrared Zone burner (DD),
through the small opening on the right side of
the Infrared Zone support frame (DC). Align and
assemble the electrode using the self
tapping screw provided, as shown in figure E.
DC
DC
DL
DL
DD
DD
DC
CC
DD
DC
B
A
C
D
8
7
6
6
YOU WILL NEED:
YOU WILL NEED:
6
14
7
8
13
X 2
X 1
X 2
X 2
X 2
YOU WILL NEED:
9
Position the heat shield (CO) into the lower cart
and assemble to the bottom of the front brace
(CK), and the bottom of the Upper back panel
(CN), as shown in figure A, B and C.
X 4
A
f. Position the cooking grate (DG) on the Infrared
Zone support frame (DC).
CO
CK
DE
E
B
CO
CN
F
DG
Front view
Back view
