6
PROGRAMMING YOUR
COFFEEMAKER
TO BREW COFFEE
1. Turn the FUNCTION KNOB to the “Brew”
position.
2. Lift the FLIP SWITCH up to the “On” posi-
tion and release. The red “On” indicator
light will illuminate and brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Simply press the FLIP SWITCH down to the
“Off” position and release.
PROGRAMMING YOUR COFFEEMAKER
FOR DELAYED BREW TIME
To set the Time:
1. Turn the FUNCTION KNOB to “Clock”.
a.
Hours:
Press and hold the “Hour” button
to scroll through numbers quickly. When
number displayed approaches the desired
setting, press and release (pulse) the but-
ton to advance one digit at a time. After
setting the correct hour, the default will be
the last time set unless power is shut off.
Note: When the number count passes 12, the
PM light will be displayed on the LCD.
b.
Minutes:
Press and hold the “Minute”
button to scroll through numbers quickly.
When number displayed approaches the
desired setting, press and release (pulse)
the button to advance one digit at a time.
After setting the correct minute, the
default will be the last time set unless
power is shut off. To finish setting time,
turn the FUNCTION KNOB to any other
setting or simply wait until the numerals
stop blinking.
To program the Auto On
1. Set the desired Brew-Start time.
a. Turn the FUNCTION KNOB to “Prog”.
b. Set the time you want coffee to begin
brewing by using the minute and hour
push buttons. Follow the same instruc-
tions you used to set the time of day, in
the
To set the time
section above.
2. Turn the FUNCTION knob to the “Auto On”
position. LCD will display the current time.
3. Lift and release the FLIP SWITCH. The
green indicator light will come on to remind
you that the programming function is in use.
At the programmed time, the red light will
come on as well, indicating that the brew
cycle is starting. Both lights will go off when
brew cycle ends.
NOTE: To reactivate the auto-on feature to
start brew cycle at the same time another day,
simply lift and release the FLIP SWITCH. The
green “auto-on” light will illuminate.
Decalcification:
Decalcification refers to the removal of calcium
deposits which form over time on the metal
parts of the coffeemaker.
For best performance from your Brew Central
Thermal
™
Coffeemaker, decalcify the base unit
from time to time. The frequency depends
upon the hardness of your tap water and how
often you use the coffeemaker. The flashing
Self Clean light will indicate when you should
clean your coffeemaker.
Self Cleaning:
If the Self Clean light begins to flash when
the coffeemaker is turned on, it is telling you
that the calcium buildup is interfering with the
functioning of your coffeemaker and the flavour
of your coffee. To clean, fill the water reservoir
to capacity with a mixture of 1/3 white vinegar
and 2/3 water. Press the Self Clean button.
When the self clean light glows, turn the
coffeemaker on by pressing the flip switch to
ON. The Self Clean light will shine steadily.
The coffeemaker is now in Self Clean mode.
One cycle should be sufficient to adequately
clean the coffeemaker. When the cycle is
completed and the five beeps sound, the cof-
feemaker will shut off. Turn the coffeemaker
ON to see if the Self Clean light continues to
flash. If it does, turn it to OFF and then repeat
the cleaning procedure with a fresh solution of
vinegar and water.
If the Self Clean light no longer flashes, turn
the coffeemaker to OFF and then run one
cycle of fresh cold water through the unit
before using the unit again to brew coffee.
Notes on the Self Clean Function
Pressing the Self Clean button cancels all
other settings. If it is pressed accidentally,
DCC1400C_IB_BIL.qxd 2/16/05 2:09 PM Page 7
