To operate
harness
7.1 To fit harness insert both waist clips into
clasp (D). Listen for the “click”.
7.2 To release the harness press the top and the
bottom of the waist clips and pull apart .The shoulder
straps can be unhooked from the waist clips if required .
7.3 Your harness is fully adjusted by moving the slide
A,B,C, to make fitting easy .
Fitting the legs
6.1 The front and rear legs have a different width.
Please be aware that the rear leg is narrower at
the top, than the front leg.
6.2 Identify which leg is the rear and which is the
front.
6.3 Remember that the front leg attaches to the
back of the highchair (A) whilst the rear leg is
attached to the front (B).
6.4 Push a pair of the legs a little way into the seat
frame tubes and push in the spring pips, con
tinuing to push the legs until the pips appear in
the holes.
6.5 Repeat this process until each leg is fitted
securely.
6.6 Should the highchair need to be taken apart,
gently push in the spring pips with a small
screwdriver and evenly ease out the leg assem
blies.
6.7 The fit of the legs in the frame is very tight for
added security. Do not force the legs into posi
tion, but apply an even and constant pressure.
A
B
B
A
