Fitting the seat back
Opening your highchair
A
A
2.1 Unclip the press studs (A) on either side of the
highchair as shown.
2.2 Slide the curved part of the seat back bar into the
fabric pocket on the seat back whilst the highchair
is still folded.
2.3 Slide the two bar ends into the seat frame tubes
andpush in the spring pips, continuing to push
the bar ends until the pips appear in the holes.
2.4 Secure the seat into position by re-clipping the
seat to the tube using the press studs on each
2.5 Ensure this is secure.
side
3.1 Please install the footrest on the frame.
It is assembled completely when you hear
"click"
3.2 Insert the crotch into the tray, push it firmly
until the corresponding pieces click together.
