CUES QT333 User Manual Download Page 3

1

Page 1

www.cuesinc.com

1-800-327-7791

Page 102

www.cuesinc.com

1-800-327-7791

Introduction

Page 1

www.cuesinc.com

1-800-327-7791

Page 102

www.cuesinc.com

1-800-327-7791

WiFi Range Extender

User Guide

This manual includes instructions for the CUES WiFi Range Extender. 

Disclaimer:
This product contains a TP-Link product modified for use with CUES equipment. TP-Link is a registered Trade-
mark of TP-Link Corporation Limited.

Basic Functions

• 

Power ON/OFF - Press the large button at the top of the Range Extender to turn the unit on/off. The  

 

switch will illuminate when powered on. The switch must be in off position for charging.

• 

Battery Gauge - Press the button on the bottom end (threaded end) of the Range Extender to check the  

 

battery state in the battery % window on the side of the unit.

• 

Charge Port - Only use the CUES supplied charger for the Range Extender. The charger will illuminate  

 

green when battery is charged and red when charging.

• 

Status Light - The status light illuminates the area beneath the top cap of the Range Extender. A solid  

 

light means the Range Extender is connected to a specified QZ3/SPiDER Network; a flashing light    

 

means the  Range Extender is not connected.

POWER SWITCH

CHARGING PORT

BATTERY GAUGE BUTTON

BATTERY GAUGE

Summary of Contents for QT333
















Reviews: