CuddeLink Cell Home Quick Set
-
Up
A quick guide to setting up your CuddeLink Cell Home camera.
Certain
menus may appear differently; this guide references set up of cameras
on version 8.3 firmware.
920
-
347
-
3810
www.cuddeback.com
Cell Home
-
Recommended Settings
The following explains the
recommended settings
for quick
-
set up of Cuddeback cameras.
There are a few options under Commands that you can change, but we recommend leaving them set to default. Leaving them
on default is the recommended option.
Press Mode key to Settings, which should flash EZ Mode and is the recommended mode to use for quick set
-
up.
Press More key and you will see the camera Delay, which is set to 15 seconds and the recommended setting for quick set
-
up.
The Delay dictates how fast the camera will reload to take an image after it has already been triggered by heat/motion and
taken an image.
Press More key and you will see the Video setting, which is default set to OFF. We recommend leaving it to off for quick set
-
up.
Quick Set
-
Up
-
ARM the camera
Press Mode key to ARM. The camera will begin countdown and ARM to take pictures.
