CuddeLink Remote Quick Set
-
Up
A quick guide to setting up your CuddeLink camera(s) as a Remote or Re-
peater.
Certain menus may appear differently; this guide references set
up of cameras on version 8.3 firmware.
920
-
347
-
3810
www.cuddeback.com
Quick Set
-
Up
-
Settings
Press Mode key to Settings. The LCD Display will flash between Setup and the mode the camera is in. The camera is default
set to EZ Mode for quick Set
-
up. If you do not see EZ Mode, use your Up Arrow to get to EZ Mode.
Press More key to Delay. The camera
’
s default Delay is set to 15 seconds and the recommended setting for quick set
-
up. The
Delay dictates how fast the camera will reload to take an image after it has already been triggered by heat/motion and taken
an image.
Quick Set
-
Up
-
ARM the camera
Press Mode key to ARM. The camera will begin countdown and ARM to take pictures.
