
FUNCTION OPERATING PART
www.cuckoo.co.kr
The button has to be pressed until buzzer sounds. There is a chance that the picture may be different with actual one.
Keep Warm /Reheat button
Used to warm or reheat.
(Refer to page 27)
Pressure Cook/Turbo
Button
Used to start cooking
(Refer to page 17)
Cancel button
Used to cancel a selection or
release remaining steam inside
the inner pot.
(Refer to page 33)
Set button
Used to select a function or
to buttonlock function.
(Refer to page 30)
Preset/Auto
Clean button
Used to preset time.
(Refer to page 25-26)
Also used for automatic
steam clean function
(Refer to page 18)
Mode button
Used to customize
individual cooking
preference, time-setting,
voice volume setting,
keep warm temperature
setting, and power saving
movement
Menu / Selection button
Used to select glutinous rice, sushi, mixed rice, GABA, rice and
beans, old rice, nu rung ji, nutritious rice, nutritious porridge, all-
purpose steaming and automatic sterilization (Steam Cleaning),
and to modify preset time. See page 25.
For mode button and setting Gaba use the multi cook time
Seepage 23, 24
Display
When the inner pot is not placed into the unit.
Temperature sensor problem or fan motor problem.
marks blink.
When pressing the Pressure Cook and Timer botton, while the
Lock/Unlock handle is on “Unlock” Turn the Lock/Unlock handle “Lock”
When boiling only water.
When setting preset time longer than 13 hours
Set the preset time within 13 hours. (Refer to page 25~26)
When the product has any problems or used it inappropriately, you can follw the below marks.
If error persistently shows up even in normal using conditions or after taking measure, inquire with customer service .
Error Code and Possible Cause
It appears on the display when you press Start button again, or if the cooking has finished and you’ve never
ever turned the handle to ‘Unlock’. It can be solved by turning handle to ‘Unlock’ and then turn to ‘Lock’.