▶
▶
▶
▶
▶
▶
15
Details to Check before Use
Empty the tray regularly.
▶
You need to regularly replace the filters
to ensure clean water.
▶
Refer to page 26 for the filter
replacement cycle.
Replace and manage the Filter
regularly.
▶
Before turning on the “Hot” button, make sure the
water supply is available and the tap water supply
valve is open.
How To Get Hot Water
Press the “Hot” button for 3 seconds to turn it on. It
takes about 30 minutes for the heater to heat the water.
(The red lamp will be turned on)
Gently push the Hot Water Lever, and then press the
Child Lock Button.
Lift the Hot Water Lever up at a 90° angle and press the
Child Lock Button for a continuous extraction of hot water.
Do not press the hot water lever while pressing the Child
Lock button. This may create a splash and potential burn.
After the discharge of hot water, slowly return the lever to its
original position.
(If this is done too quickly, you may be burnt by splashing hot water)
The first glass may be lukewarm. This is due to the outflow of cold water and hot water
through the same pipe. After the first glass, hot water will be extracted at a normal temperature.
5
6
3
If you no longer want to get hot water while the hot water operation is activated, press the
“Hot” button for 3 seconds to stop the hot water function.
▶
The hot water Red LED will turn off.
2
1
Details to Check before Use/ How To Use
