❶
❷
❸
❹
❺
❷
❶
❸
❺
13
❻
Connect 1/4" Water Line to T-valve
• Attached 1/4" water line to the quick connect adapter on the T-valve, push the 1/4" line fully onto the
quick connect fitting nub. After pressing the water line fully onto the quick connect nub, make sure to
use the locking nut properly to secure the 1/4" water line in place on the quick connect fitting.
❼
Connect 1/4" Water Line to Water Purifier
• Locate the "tap water inlet" on the water filtration unit and insert the other end of the 1/4" water line
(same line connected to the T-valve quick connect nub) into the quick connect valve at the back of
the water filtration unit. Ensure you attach to the inlet line and have a secure connection by lightly
tugging on the water line to ensure it remains locked into the fitting at back of the filtration unit.
• Check all water lines to ensure the connections are secure
❽
Double Check all connections
❾
Turn on Cold Water Supply
• Open the cold water inlet supply by turning the handle counter clockwise (this is the same valve that
was turned off in step 1). This will allow was to flow though the newly attached T-valve, to the sink
faucet and to the water purifier. Check all water connections to ensure there are no leaks.
• Allow the hot and cold water tanks to fill completely and empty the tanks through the hot/cold
dispense handles on the front of the water purifier. Complete this process three times.
❿
Flush Filters
Turn on the Hot/Cold Function
• After flushing the filters, allow the hot and cold tanks to fill completely. Once full, turn on the Hot/Cold
buttons on the back of the machine to activate the hot tank and the cold tanks. It is especially
important the hot tank is full before turning on the hot function.
How To Install the Product
