Cuckoo CIHR-A20 Series, User Manual, Page: 23 / 38

23
ww
w.c
uc
ko
o.c
om
.m
y
M
A
N
U
A
L
How to Use
Pause function
How to set
▶
If you press the [Pause] button during heating, the heating of the hob will stop
along with the voice prompt "Cooking has been stopped temporarily," and
the current heat level indicator will flash.
▶
Pause is only for manual heating. The Pause function will not work while
heating on the modes such as Pan fry, Grill, Hot Pot, Broth, and Keep Warm.
※ If you are using the other hobs than the induction machine which is working on
menus like Pan fry, Grill, Hot Pot, Broth, and Keep Warm, the Pause function
will operate for the other hobs except for the Induction.
The heat level is not adjusted during Pause.
1
This temporarily stops heating the hob in use.
How to fix
▶
If you press the [Pause] button or the [Start] button during a Pause, the
Pause will be released and the heating will start again along with a voice
prompt saying, "Cooking will start again."
▶
If you press the [On & Off] button during Pause, Pause will be released and
it will return to the Power-Saving mode.
▶
If power is applied again after a power failure during Pause, the Pause will
be released and it will return to the Power-Saving mode.
▶
When 1 hour has elapsed during the Pause, manual heating for all the hobs
is canceled and it will return to Standby status.
▶
If the heat level of a hob becomes 0 during Pause, the pause will be
canceled.
2
Off Timer Setting
How to set the off time
❶
When one hob is used
▶
Set the desired time with [-] or [+] button.
▶
The time control is adjusted in 1 minute increments up to 1 ~ 20 minutes, in 5
minute increments over 20 minutes, and in 10 minute increments over 1 hour.
The adjusted time is reflected immediately.
❷
When multiple hobs are used at the same time
▶
Press the [Select Zone] button to select the hob for which
you wish to set the time.
(It is possible to select the particular hobs only you are using)
▶
When a hob to set is selected (DUAL highlight, induction), the LED on the hob
turns on along with a prompt “DUAL highlight / induction select desired
cooking time with the select time button.”and the remaining time is displayed.
▶
Set the desired time with the time selection [–] and [+] buttons.
▶
The time control is adjusted in 1-minute increments up to 1 ~ 20 minutes, in 5
minute increments over 20 minutes, and in 10 minute increments over 1 hour.
The adjusted time is reflected immediately.
❸
How to display the time on the Off Timer
▶
The off-time displayed while cooking appears based on the hob with
the earliest off-time.
▶
If you adjust the heat level for a certain hob with the [Heat Level Setting]
button, the off-time for that particular hob will be displayed.
▶
If 7 seconds pass without any button input after the setting is completed, the
earliest off-time will be displayed.
▶
If the time for the current hob is the shortest, the off-time display for
the current hob is maintained.
▶
When cooking on the hob is completed, the earliest Off time is displayed.
1
This is to set the end time of the hob in use.