Cubix Corporation
2800 Lockheed Way
Carson City, NV 89706-0713 ● Page 5
Sales 800.829.0550
http://www.cubix.com
xprm8g3-1625urp-20170801
7. Confirm that the PEX1 -Cable Link LED lights green for the MIB inside
the Rack Mount 16 enclosure.
Xpander MIB is functioning properly
once the PEX1-Cable LED lights green.
Proceed to the next step to install
adapters.
8. Switch off AC power to the host computer.
Leave the power cords and the external
PCIe cables to the host computer connected.
9. Disconnect AC power from Xpander MIB or
main board in which you plan to install the
GPUs.
10. Remove the screws for holding down the
PCIe card end brackets.
11. Install the graphics or other controller(s) in
the Rack Mount 16 PCIe slot(s) and secure
each with the screws provided in the top of
the I/O panel.
