RV BLIND SPOT DETECTION SYSTEM: For Motorhomes |
7
English
Installation Guide
16. Connect IGN lead to a switched power source (i.e. cigarette lighter, radio accessory
power, ignition switch). Connect the turn signals and reverse leads to the appropriate
wiring in the vehicle.
17. Connect all the connections then route the harness to the Control Unit and affix the
unit in a safe location in the vehicle (i.e. under th dashboard, under the seat, inside
the console). Connect the harness connectors to the Control Unit.
15. Locate the OBD-II connector and connect the adapter to the socket. Route the harness
to the desired location for the Control Unit to be installed
5. INSTALLATION
