Cub Cadet Pro2B+ 21120902, Operator'S Manual, Page: 35 / 38

condition. Repair or replace any missing or damaged
include the component’s current safety decal specified
Correct any deficiency before continuing operation.
3. Make sure all shields are in place and in good
7. Check for wear or deterioration of the upper or lower
replacement component installed during repair shall
shields.
been torn or worn through, replace immediately.
5. Listen for abnormal sounds, which might indicate
4. Perform lubrication per paragraph 4-2.
loose parts, damaged bearings, or other damage.
hoses. If there are any portions of the hose that have
6. With the engine off check the belt tension and inspect
the pulley belt for cracks or tears.
After Each Use:
1. Clean all debris from machine especially from the
decals. Replace any missing or illegible decals.
container, underneath the belt shields, and safety
2. Inspect the unit for worn or damaged components.
Repair or replace before the next use. Any
by the manufacturers to be affixed to the component.
3. Check belt for proper tension.
WRITE THE MODEL AND
SERIAL NUMBER IN THE
BOX TO THE LEFT
FOR FUTURE REFERENCE.
Collection system owners should record the name and
telephone number of their Service Center. Your Service
Center will be happy to supply replacement parts,
accessories, and do any service or repairs to your
collection system. If for any reason your Service Center
is unable to service your collection system or supply
replacement parts, contact New PECO, Inc. and include
the following information on the chart below.
Blower Assembly:
SECTION V
PARTS AND SERVICE
5-1 Parts And Service Information
1. Every 100 hours grease idler arm grease fitting with
white lithium grease.
THE SERIAL NUMBER PLATE
IS LOCATED ON THE TOP
ASSEMBLY
Unit Model Number:
_____________________________
Unit Serial Number:
_____________________________
Address:
_____________________________________
State:
__________ Zip:__________
Unit Engine Size: _____________________________
Date of purchase:
_____/_____/_________
Dealer/Distributor Name:
________________________________________
Phone Number: ____________________________
59A30046150
2_____XP______
NOTE:
Oil in gearbox should cover the gears. If not,
The gearbox ships with 6.0 oz. of oil, but we
drain the gearbox and fill using an 80W-90 gear oil.
the gearbox. DO NOT OVERFILL!
4-2 Lubrication
Gearbox:
1. Every 20 hours of use: Check oil levels in gearbox.
2. First 60 hours of use: Change oil.
3. Every 100 hours of use: Change oil.
recommend replacing with a measured 5.5 oz. to fill
35