Cub Cadet Lawnkeeper 500, Original Operating Instructions, Page: 44 / 84

44
en
Work time
z
Allows the user the option of setting the operating time from 15
minutes up to 2 hours and ‘MAX’ which is generally 2.5 to 3.5
hours, depending on grass type and condition.
z
This menu is used when operating the mower in Manual Start
from the Base Station, as when the mower departes automatic
from the Base Station, the ‘Work time’ it used is as defined in the
weekly program.
External Base
z
Allows the option to setup the Base Station outside the lawn; re-
commended when you want to conceal the mower from people
eyes while not mowing.
z
The default set by the producer is set to ‘off’; if you setup Lawn-
keeper 500 outside the lawn it is required to change the setting of
‘External base’ to ‘on’.
z
The mower follows the wire for 5m (15ft) from the Base Station
before it enters to mow the inner area, thus it is recommended to
set the Base Station at maximum 3-4m (10-13ft) from the lawn;
however if you want to set the mower in a bigger distance from
the lawn, you have to increase the ‘Distance’ setting (in the ‘Ex-
ternal base’ menu) respectively.
Settings
Child Guard
Child guard is a feature that when activated will help deter use by
young children and other unauthorized people. It will prevent operati-
on to those not familiar with the mower.
1
Attention!
It is strongly recommended to use the “Child Guard” menu op-
tion in order to prevent operation by children or others who are
not familiar with the safe operation of the Robomow.
z
The key sequence to unlock the guard for operation is pressing
the ‘UP’ arrow key and then the ‘STOP’ key to unlock the controls.
Two minutes of inactivity will re-lock the keys.
Anti-Theft
The anti-theft system provides the user a disabling function that will
prevent anyone from using or driving the Lawnkeeper 500 unless
they have the valid code to enter.
1. You will be prompted to enter a four-digit code of your choice to
use as your personal security code.
2. Use the scroll arrows in order to change each digit position to a
different number.
3. Press ‘GO’ to move to the next digit.
Time And Date
Allows setting time and date:
Rain Sensor
The Rain sensor feature enables the mower to detect rain and skip or
stop the operation as it is detected.
Rain sensor on/off
Set sensitivity
1. Press ‘GO‘
2. Scroll to select different operating
time.
3. Press ‘GO’ to confirm.
Work time
Press GO
Max
Confirm
Max
Confirm
1. Press ‘GO’
2. Scroll UP/DOWN to set the clock and
the date and press ‘GO’ for the next
digit.
3. Press ‘GO’ to confirm.
1. Press ‘GO
2. Scroll UP/DOWN to set the Rain sen-
sor on- or off.
3. Press ‘GO’ to confirm.
1. Press ‘GO
2. Scroll UP/DOWN to regulate the sen-
sitvity.
3. Press ‘GO’ to confirm.
Time and Date
Press GO
00:00 dd/mm/yy
Next digit
10:37 23/04/07
Confirm
Rain sensor
Press GO
Rain sensor ON
Press GO
Rain sensor OFF
Confirm
Rain sensor
Press GO
Set sensitivity
Press GO
Reading (29) 25
Confirm