background image

LIMITED WARRANTY

The limited warranty set forth herein is given by Cub Cadet LLC with respect to 

a new Spreader (hereinafter “Attachment”) purchased and used in the United 

States and/or Canada to the Initial Purchaser (as defined herein). For Canadian 

sales, the warranty is provided by MTD Products Limited.  

Scope of the Limited Warranty

Cub Cadet LLC offers the following limited warranty to the Initial 

Purchaser for residential or otherwise non-commercial use: except 

for the Exclusions (defined herein), during the Warranty Period (as 

defined herein), this Attachment will be free from manufacturing 

defects (including workmanship and materials).  The “Initial 

Purchaser” is the first person to purchase this new Attachment from 

an authorized Cub Cadet dealer, distributor and/or retailer of such 

products.  This limited warranty is non-transferrable.  Except as 

otherwise set forth herein, the limited warranty period for this new 

Attachment purchased by the Initial Purchaser is 

one (1) year

 from 

the date of purchase as shown on the original sales receipt for the 

product (“Warranty Period”).  

Defects in Workmanship or Materials

Except for the Exclusions, this Attachment is warranted to be free from 

manufacturing defects in either workmanship or materials for the Warranty 

Period.  During the Warranty Period, Cub Cadet LLC will, at its option, either 

repair or replace any original part that is covered by this limited warranty and 

is determined to be defective in workmanship or material.

To qualify for this limited warranty this Attachment:

1. 

Must have been purchased from an authorized retailer.

2. 

Must have been purchased within the United States or Canada by the 

Initial Purchaser.

3. 

Must have been used for residential purposes only.

4. 

Must have been used in a manner consistent with the normal and 

proper intended use for this Attachment.  This Attachment is not 

intended for rental or commercial use.

Who can perform repairs under this warranty?

In order to qualify for the limited warranty as set forth herein, the repairs 

made under this warranty must be performed by an authorized Cub Cadet 

service provider. 

How to get service under this limited warranty:

To locate a Cub Cadet warranty service provider, contact your authorized Cub 

Cadet dealer, distributor, or retailer or contact Cub Cadet LLC at P.O. Box 361131, 

Cleveland, Ohio 44136-0019 or call 1-877-282-8684 or log on to our Website at 

www.cubcadet.com.  In Canada, contact MTD Products Limited, Kitchener, ON 

N2G 4J1, or call 1-800-668-1238 or log on to our Web site at www.mtdcanada.

com. This limited product warranty is provided by Cub Cadet LLC and is the only 

product warranty provided by Cub Cadet LLC for this Attachment.  A COPY OF 

YOUR SALES RECEIPT IS REQUIRED FOR WARRANTY SERVICE.

What this limited warranty does not cover.
This limited warranty does not cover the following (the “Exclusions”):

1. 

Product purchased outside of the United States or Canada.

2. 

Damage due to lack of maintenance and/or improper maintenance as 

described in the operator’s manual

3. 

Normal wear and tear resulting from use of the product. 

4. 

Any expendable, consumable, or routine maintenance item which 

needs replacement or service as part of normal maintenance, unless 

such items have defects that cause failure or premature wear within the 

first thirty (30) days of purchase.  Normal wear items include but are not 

limited to, tires, fuses, blades, batteries, belts, hoses, string trimmer line, 

engine oil, hydraulic oil,  grass bags, and other consumable items where 

applicable, or adjustments, such as clutch, brake or deck adjustments 

or tune-ups.   

5. 

Use of the product that is not consistent with the intended use 

thereof as described in the operating instructions, including, but not 

limited to, abuse, misuse and/or neglect of the Attachment or any use 

inconsistent with and/or non-compliant with instructions contained in 

the Operator’s Manual.  

6. 

Any Attachment that has been altered or modified in a manner not 

consistent with the original design of the Attachment or in a manner 

not approved by Cub Cadet LLC.

7. 

Paint repairs or replacements for defective paint (including materials 

and application) are covered for a period of three (3) months; provided 

however, that this limited warranty for defective paint does not apply 

to and shall not cover damage(s) to the paint application resulting from 

exposure to weather conditions and/or resulting from normal use of the 

Attachment, including misuse.

This warranty does not cover and Cub Cadet LLC disclaims any responsibility 

for:

1. 

Loss of time or loss of use of the Attachment.

2. 

Transportation costs and other expenses incurred in connection with 

the transport of the Attachment to and from the authorized Cub Cadet 

service provider.

3. 

Any loss or damage to other equipment or personal items.

4. 

Damages caused by improper maintenance or the use of other than the 

specified fuel, oil or lubricants as approved in the operator’s manual.

5. 

Damage resulting from the installation or use of any accessory or part 

not approved by Cub Cadet for use with the Attachment.  

Limitations:

1. 

THERE ARE NO IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 

TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR 

A PARTICULAR PURPOSE.  NO WARRANTY SHALL APPLY AFTER THE 

APPLICABLE WARRANTY PERIOD AS SET FORTH ABOVE AS TO THE 

PARTS AS IDENTIFIED.  NO OTHER EXPRESS WARRANTY OR GUARANTY, 

WHETHER WRITTEN OR ORAL, EXCEPT AS MENTIONED ABOVE, GIVEN 

BY ANY PERSON OR ENTITY, INCLUDING A DEALER OR RETAILER, WITH 

RESPECT TO ANY PRODUCT SHALL BIND CUB CADET LLC.  DURING THE 

WARRANTY PERIOD, THE EXCLUSIVE REMEDY IS REPAIR OR REPLACEMENT 

OF THE DEFECTIVE PART, AS SET FORTH ABOVE.  (SOME STATES DO NOT 

ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO 

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.)

2. 

THE PROVISIONS AS SET FORTH HEREIN PROVIDE THE SOLE AND 

EXCLUSIVE REMEDY ARISING FROM THE SALE.  CUB CADET SHALL NOT 

BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES 

INCLUDING, WITHOUT LIMITATION, FOR TRANSPORTATION OR FOR 

RELATED EXPENSES, OR FOR RENTAL EXPENSES TO TEMPORARILY REPLACE 

A WARRANTED PRODUCT.  (SOME STATES DO NOT ALLOW THE EXCLUSION 

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 

ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.)

3. 

In no event shall recovery of any kind be greater than the amount of the 

purchase price of the product sold.  Alteration of the safety features of 

the product shall void this limited warranty.  You assume the risk and 

liability for loss, damage, or injury to you and your property and/or to 
others and their property arising out of the use or misuse or inability to 

How State Law Relates to this Warranty:  

This limited warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state.  

 

 

 

    

  

CUB CADET LLC

LIMITED WARRANTY  - ATTACHMENTS AND ACCESSORIES

Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684

MTD Products Limited, Kitchener, ON  N2G 4J1, Phone:  1-800-668-1238

108402

Summary of Contents for FastAttach 19A30035100





































Reviews: