Cub Cadet CC924HT Operator'S Manual Download Page 5

-

5-

Read warning labels on the unit and understand them. If any label is missing, damaged, or 

worn get a replacement from your dealer and install it in the correct position.

SAFETY AND WARNING SYMBOL

Indicates danger,warning or a reason 

to be cautious.Can be used together 

with other symbols or pictograms

READ OPERATING MANUAL

Non-compliance with the operating 

instructions and precautions may 

result in serious injuries.Read the 

operating manual before starting or 

operating the unit.

WEAR HEAD, EYE AND EAR 

PROTECTION
CAUTION:

 Ejected objects may 

cause serious head,eye injuries 

and excess noise may cause 

loss of hearing.When operating 

the unit,wear head ,eye and ear 

protection.

                   
                     KEEP BYSTANDERS AWAY

CAUTION:

 All bystanders,especially 

children and pets,must be kept at 

least 15m from the working area.

PETROL

Always use clean and fresh lead-free 

petrol for mixing petrol.

OIL

Use only authorised oil according 

to the operating manual for mixing 

petrol.

EJECTED OBJECTS AND ROTATING 

PARTS MAY CAUSE SERIOUS 

INJURIES
CAUTION: 

Do not use the unit if the 

protective housing has not been 

correctly positioned for cutting.Keep 

away from the rotating line coil.

ON/

OFF/

CHOKE SETTINGS

1.CHOKE CLOSE starting position

2.CHOKE OPEN running position

IGNITION SWITCH

RUN

IGNITION SWITCH

OFF/STOP

BEWARE OF HOT SURFACES

DO not touch hot muffler cover,gear 

box or cylinder

SHARP BLADE
CAUTION

: The blades are very sharp 

and can easily cause cuts.

EXHAUST GAS

Exhaust gas contains carbon 

monoxide, an odorless and deadly 

poison. Do not run engine in an 

enclosed area.

REAR HANDLE

The rear handle can be swiveled to 

five positions.

WARNING LABELS AND SYMBOLS

       

Summary of Contents for CC924HT

















Reviews: