12
SERVICE AND MAINTENANCE
IMPORTANT!
Bring the battery charger when arriving at your authorized service
dealer for any scheduled service.
DANGER
•
The electrical components on this riding mower are not serviceable.
Please contact an authorized service dealer for any service needs.
•
Have your riding mower serviced by qualified service personnel using
only identical replacement parts. This will ensure that the safety of
the riding mower is maintained.
NOTE:
At relevant time intervals on start-up,
service minders will be displayed on the VCM.
To clear service minders press the cruise control
button. (S02) shown for example.
Post-Operation Riding Mower Care
After each operation of the riding mower, the following procedures should
be implemented to extend the life of your riding mower and ensure safe
operating conditions.
DANGER
Failure to follow these recommendations may result in serious injury
to yourself or others and may cause damage to the riding mower.
WARNING
Before inspecting, cleaning or servicing the riding mower, power off
the riding mower, and remove the key.
Follow the maintenance schedule given below. This chart describes service
guidelines only.
Contact an authorized service dealer to schedule a service.
Prior to
Use
After First
Five Hours
(S01)
Every Five
Hours
(S02)
Every
10 Hours
(S03)
Every
25 Hours
(S04)
Every
50 Hours
(S05)
Every 100
Hours
(S06)
Prior to
Storing
Clean Top & Underside of Deck
P
P
Check/Clean Around Fuses, Wiring & Wiring Harnesses
P
P
Check/Clean Around Transmission & Axle
P
P
Clean Riding Mower
P
Lube Front Axles & Rims
P
P
Lube Pedal Pivot Points, Parking Brake & Lift Linkage
P
P
Check Tire Pressure/Inflate to Sidewall Specification
P
P
Check Deck Level/Pitch/Adjust as Needed
P
P
Check Blade(s)/Sharpen or Replace as Needed
P
P
P
Charge Battery
P
P
Check Safety Interlock System
P
Check Mower Blade Stop Time
P
Check Blade Mount Bolt Torque
(Tighten to 450-600 in-lbs(51.9–67.8 N-m))
P
P
P
Sharpen Blades
P
Check That All Hardware is in Place & Secure
P
P
Cleaning the Underside of the Deck
WARNING
To prevent serious injury, do not use water to clean the riding mower,
battery, or battery charger. Do not use strong detergents. Household
cleaners that contain aromatic oils such as pine and lemon, and
solvents such as kerosene, can damage plastic.
The underside of riding mower deck should be cleaned after each use as grass
clippings, leaves, dirt and other debris will accumulate. This accumulation of grass
clippings, etc., is undesirable as it will promote rust and corrosion.
1.
Remove any buildup of grass and leaves on or around the deck motor and
underside of the riding mower (DO NOT USE WATER). Wipe the riding mower
clean with a dry cloth.
IMPORTANT!
Do not use a pressure washer or garden hose to clean your riding
mower. These may cause damage to electric components or the electric motor. The
use of water will result in shortened life and reduce serviceability.
Cleaning the Riding Mower
WARNING
If the riding mower has been recently run, metal surfaces will be hot
and can cause burns to the skin. Let the riding mower cool for at least
five minutes. Exercise caution to avoid burns.
Summary of Contents for 33 27JD Series
Page 52: ...NOTES 18 ...
