Cub Cadet 19A30003100, Operator'S Manual

Page: 4 / 52

4 s
ectiOn
2 — i
MpOrtant
s
afe
O
peratiOn
p
ractices
Safety Symbols
This table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the
machine before attempting to assemble and operate.
Symbol Description
READ THE OPERATOR’S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to
assemble and operate
STOP
Turn off the engine before opening the bagger cover.
Use slow speed. Choose a low enough speed setting so 3.
that you will not have to stop or shift while on the slope.
Tires may lose traction on slopes even though the brakes
are functioning properly. Always keep machine in gear
when going down slopes to take advantage of engine
braking action.
Follow the manufacturer’s recommendations for wheel
4.
weights or counterweights to improve stability.
Keep all movement on the slopes slow and gradual. Do
5.
not make sudden changes in speed or direction. Rapid
engagement or braking could cause the front of the
machine to lift and rapidly flip over backwards which could
cause serious injury.
Avoid starting or stopping on a slope. If tires lose traction,
6.
disengage the blade(s) and proceed slowly straight down
the slope.
Do Not:
Do not turn on slopes unless necessary; then, turn slowly 1.
and gradually downhill, if possible.
Do not mow near drop-offs, ditches or embankments. The
2.
mower could suddenly turn over if a wheel is over the edge
of a cliff, ditch, or if an edge caves in.
Do not try to stabilize the machine by putting your foot on
3.
the ground.
Do not use a grass catcher on steep slopes.
4.
Do not mow on wet grass. Reduced traction could cause 5.
sliding.
General Service
Before cleaning, repairing, or inspecting, make certain the 1.
blade(s) and all moving parts have stopped. Disconnect the
spark plug wire and ground against the engine to prevent
unintended starting.
Keep all nuts, bolts, and screws tight to be sure the
2.
equipment is in safe working condition.
Never tamper with your mower’s safety interlock system
3.
or other safety devices. Check their proper operation
regularly.
Never attempt to make adjustments or repairs while the
4.
mower’s engine is running.
Grass catcher components and the discharge cover are
5.
subject to wear and damage which could expose moving
parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer’s (O.E.M.) parts only,
listed in this manual. Use of parts which do not meet the
original equipment specifications may lead to improper
performance and compromise safety!
Maintain or replace safety and instruction labels, as
6.
necessary.
WARNING!
Your Responsibility—Restrict the use of this power machine to persons who read, understand and
follow the warnings and instructions in this manual and on the machine.
SAVE THESE INSTRUCTIONS!