CUAV TeleLink, Manual

Page: 8 / 14

Thank you for choosing our products!
Product description
Spec
Please read this manual earnest before use!
This description only introduces the simple connection method.
For detailed tutorials, please visit our CUAV official document
http://doc.cuav.net
This product is compatible with drones using APM and PX4
firmware.
CUAV TeleLink remote control is a drone map data transmission
system created by CUAV and Xiaomi Ecological Company, and
represents the advanced level of the current open source drone
industry.
TeleLink hardware uses SoC design, which integrates LTE-based
wireless communication systems, image codec processing
systems, and other supporting system sub-modules on a single
chip. Utilize full link depth optimization technology to bring
better experience of long distance, low latency and low power
consumption.
In software, TeleLink runs the Android system, built-in QGround
Control, is compatible with both APM and PX4 open source
autopilot. 70ms minimum delay enables smooth observation
and control of flight information and high-definition images.
Processor
Pinecone S1
Android version
Transmission
Latency
Video Resolution
Operating Frequency
Receiver Sensitivity
Interference Recovery
4AP Cortex A53@2.2GHz
4AP Cortex A53@1.4GHz
4 Core Mali- T860 GPU
A7 + DSP SDR
Android 7.0
FCC 20km CE / SRRC 12km
Minimum 70ms not included the delay caused by
input source
720p@30fps 1080p@30/60fps
2.4GHz ISM
-99dBm@20MHz BW
<1s
- 7 -