LTE-LINK SE user's Guide
10
Figure 4- 4 Flight controller connected
Note
：
The line sequence of the data transmission interface cable connected to the
LTE-LINK SE device is fixed and cannot be changed. When connecting the flight control data
transmission device, you need to modify it according to the interface line sequence of the
connected device. For example, there will be three USB cables when the product is sold. The
flight control data cable corresponds to the data transmission interface of the V5/V5 nano,
V3/V2, Pixhawk series devices, so this problem should not be ignored when troubleshooting.
4.2.3 HDMI interface debugging
The connection identification of the HDMI interface is shown as Figure 4-5. The
identification status of the icon in the figure is that there is no camera connected.
Figure 4- 5 HDMI not connected to the device status
If it is detected that a normal HDMI camera device is connected, the icon indication on the
screen interface will indicate the status as shown as Figure 4-6.
