CTS IPS-3106SFP-DR, User Manual, Page: 5 / 23

5
1. OVERVIEW
Thank you for choosing the Managed Industrial PoE Ethernet Switches. The Managed
Industrial PoE Ethernet Switches are designed to meet the massive needs for Fast
Ethernet network deployments and aim at Industrial PoE applications that demand wide
range of operating temperature. They are fully compliant with IEEE802.3, 802.3u,
802.3x, 802.3z and 802.3ab standards. The built-in management module allows users to
configure this Managed Industrial PoE Ethernet Switch and monitor the operation
status locally or remotely through network.
Besides, redundant power supplies are both offered on the Managed Industrial PoE
Ethernet Switches for users to create a reliable and stable network in the event of power
failure. By employing store and forward switching mechanism, the Switch provides low
latency and faster data transmission. Moreover, it also supports more advanced
functions such as QoS, Q-in-Q VLAN Tunneling, Rate Limiting, IGMP Snooping, etc..
Users can configure the required settings of the Switch and monitor its real-time
operational status via Command Line Interface (CLI).
1.1 Specification
Interface
1.
SFP-DR

LAN Ports: 10/100/1000BASE-T x 4

WAN Ports: 100/1000BASE-X x 2
2. SFP-F1-DR

LAN Ports: 10/100/1000BASE-T x 4

WAN Ports: 100/1000BASE-X x 1 + 10/100/1000BASE-T x 1
3. TP

LAN Ports: 10/100/1000BASE-T x 4

WAN Ports: 10/100/1000BASE-T x 2
Standards

Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1q, 802.1p, 802.3x and
802.3at standards
Features

Switching:

Support Auto-Negotiation in TP ports

Support MDI/MDIX Auto-Crossover in TP ports

Full/Half Duplex Mode Operation

MAC Address Table: 2K

Non-Blocking Switching Fabric: 12Gbps