PRATIKA
User and Maintenance Guide Page 14/33
5 - E L E C T R I C I T Y S U P P L Y
The electrical connections to the machine should be carried out following the instructions supplied
by C.T.R. s.r.l. which, in any case, is not responsible for connections. The machine safety
mechanisms are only guaranteed when it is correctly connected to an electricity supply. In the
workshop it is necessary to connect the machine up to the mains using the apposite plug that
comes with the machine, checking that the supply voltage corresponds to the value on the
machine plate. We advise that you follow the instructions below to correctly connect up the
electrical circuit:
- if you are using an extension cable, check that the cable core section is proportioned to the length
of the cable and that it is positioned where it cannot be damaged in any way(avoid areas where it
can be walked on or damp surfaces)
- check that the connection point to the mains supply is equipped with the prescribed safety
devices in accordance with the relevant codes in force (differential circuit-breaker mechanism and
earthing (grounding) system).
- In the event of a component breaking, please only contact our after-sales technical service.
Should you need to replace the supply plug, please contact our technical service
beforehand, and do not attempt to replace it unless you have received specific
authorisation in writing from our office in charge. In any other case, C.T.R. s.r.l. will not
be liable for damage to persons or things caused by an electricity hazard.
