CTP Systems CTPhone 1900, Applications Manual

Page: 30 / 132

2-2 DOC00101-01
CTPhone 1900 System Planning
Possible System Configurations
This section describes several ways to set up a CTPhone 1900 system.
Reading this section will help you decide the best way to set up your sys-
tem. Reading Pre-installation Tasks on page 2-6 will help you finalize base
station placement.
Single System with One or Two Base Stations
Figure 2-1 illustrates the most common arrangement of a CTPhone 1900
system. The base stations may be placed in varying locations based on
the requirements of your system. For example, they could be placed in the
same general area or on separate floors but with the cells slightly overlap-
ping to provide the greatest coverage area. They could also be located as
close as one meter apart in high traffic areas.
Coverage: 31,000 square meters (333,560 square feet) per base station
Maximum Number of Configured Users: 32
Figure 2-1. Single System with Two Base Stations
Base Station 1 Base Station 2
CTPhone
Base Station
broadcast area (cell)
Controller