Share, inspire, have fun!
With CTOUCH by your side.
Safe use of the system is possible only when the operating instructions are read completely and the
instructions are strictly followed.
Failure to comply with instructions marked with the
Note
section may result in serious damage to the
system or one of its components.
Warning!
It is important for everyone who is about to connect, install, or use the systems to have the
necessary information and access to this Installation/User Manual.
Warning!
Follow the instructions for mounting – risk of injury if these instructions are not followed.
Warning!
The appliance is not intended for use by young children or infirm persons without supervision.
Warning!
If there is visible damage on the product it must not be installed.
Assure a minimum of 15 cm of free space for movement of Wallom2 lift in both directions to avoid collision,
entrapment and clenching.
Stop operating the Wallom2.
Unplug the mains plug connected to the Wallom2.
Relieve the Wallom2 of any loads, which may be released during the work.
Make sure that the system has been installed as instructed in this User Manual.
Make sure that the required voltage of the Wallom2 is correct before the system is connected to the mains.
The required voltage is 230V AC, 50Hz.
System connection. The individual parts must be connected before the Wallom2 is connected to the mains.
Warning!
Be aware that furniture, like cupboards and chairs is not to be placed directly under or above the
range of mobile lift and touchscreen. The maximum display weight to lift is 150 kg (330 lbs).
Important information about CTOUCH Wallom2 products can be found under the following headings:
Warning!
Failure to comply with these instructions may result in accidents involving serious personal
injury.
Note
Failing to follow these instructions can result in the product being damaged or being
destroyed.