9
4. Remove the Stand’s Frame
Remove the frame using an Allen wrench to
remove the 2 screws from the top and 2 from the
bottom. Please keep the screws you remove for
each section together so you make sure to put
back the screws you removed in the same spot
5. Remove Screen Plate
Using a wrench (not included, you must have
this tool in your office) carefully remove the
4 nuts from the screws located inside the player
area and lean screen plate against the wall
.
Screen brackets are different for Pillar Stands
depending on if you are using an NEC screen.
Since this is older equipment, please
contact Ettractions for the specific
technical specs for your unique set-up.
Installation
In-Office Assembly & Testing: ExploreBoards
Use a wrench to
remove the screen
plate. Confirm the
following:
2 Media Area screws
4 Screen Frame
screws
4 Screen Plate nuts
The plate will release
from the front of the
stand.
PHOTOGRAPHED IS
“
CTM02 SLEEK
”
STAND
