Instruction Booklet
HS-925
15
Figure 25
Figure 29
Figure 28
Figure 27
5-5 DISASSEMBLING YOUR SCOOTER
•
Remove the screws to disassemble armrests. (Figure 27)
Disassembling armrests :
•
Disassemble : Open the seat storage box and have someone’s help to lift up the seat
until screws are removed.(See section 5-1 General operation - seat storage box). Use
the wrench to loosen screws and disassemble the seat. (Figure 28)
•
Assemble : Follow the same steps backwards.
Disassembling seat :
•
Remove the three screws to disassemble the storage box. (Figure 29)
•
Put the seat back and fasten the three screws to assemble.
Disassembling seat storage box :
•
The seat is heavy. Disassemble the seat by two persons to avoid danger during
operation.
•
Do not sit on the scooter when disassemble/assemble the scooter and make sure the
scooter is power off and in D position.
•
Do not modify or change the scooter with non-authorized parts or accessories.
•
Do not tow the scooter by any vehicle. It
may cause serious damage to the scooter.
•
Open the seat storage box and disassemble it. (See section 5-1General operation - Seat
storage box & 5-5 Disassembling your scooter-disassembling seat storage box) (Figure
30~31)
•
Disconnect the connecting wire of two batteries. (Figure 32)
•
Release the battery velcro straps and disconnect the battery connectors to remove the
batteries. Always use battery handle for carrying. (Figure 33~34)
•
Follow the same steps backwards to assemble batteries.
Disassembling batteries :
•
To ensure safety during the transportation, there are four fixed hooks for fixing scooter
on other vehicles. (Figure 25)
•
Make sure the scooter is in D position when
transporting.
•
Do not sit on the scooter during transportation.
5-4 FIXED HOOKS