Instruction Booklet
HS-925
9
4.INTRODUCTION & OPERATION OF CONTROL PANEL
Button Name
Operation
Hazard Light
Hi / Lo Switch
Left Turn Signal
Right Turn Signal
Horn
Headlight Switch
Speed Dial Knob
Press the Hazard lights button once to switch on, press again to
switch off
Press horn button once to sound short warning tone. Deep press
for long warning tone until button released.
Press headlight switch to turn on headlight and or taillight.
Turn toward “Rabbit” to accelerate; turn toward “turtle” to
decelerate.
Press the turn signal button once to switch on, press again to
switch off (switches itself off automatically after 30 seconds)
Press the turn signal button once to switch on, press again to
switch off (switches itself off automatically after 30 seconds)
Press H / L Speed button once to switch High / Low mode.
(Hi / Lospeed will vary depends on your current speed settings.)
4-1 IDENTIFICATION OF CONTROL PANEL
Figure 5 - HS-925 Control Panel
Horn
Hi/Lo Switch
LCD Display Panel
Left Turn Signal
Speed Dial Knob
Right Turn Signal
Headlight
Hazard Light