CTM A13R, Manual

Page: 34 / 176

34
ronments for recharging (since it does not emit
any harmful gases); therefore, it is highly recom-
mended.
•
It should not be taken for granted that batter-
ies and battery chargers with the same technical
features as those we offer will produce the same
results. Only perfect compatibility between these
elements (Pb-Acid batteries, gel batteries and bat-
tery chargers) will safeguard the performances,
the service life, the safety and the economic value
invested.
5.1.2 BATTERY CHARGER
This type of high-frequency battery charger effi-
ciently charges batteries, extending their operating
and service life. In addition, because they can be
configured, it is a very versatile solution; the same
battery charger can be used for both Pb-Acid bat-
teries and for gel batteries.
•
It should not be taken for granted that batter-
ies and battery chargers with the same technical
features as those we offer will produce the same
results. Only perfect compatibility between these
elements (Pb-Acid batteries, gel batteries and bat-
tery chargers) will safeguard the performances,
the service life, the safety and the economic value
invested.
5.2 STRUCTURE AND FUNCTIONS
5.2.1 MACHINE
Photo A
1 Recovery tank
2 Operator’s seat
3 Solution tank
4 Rear wheel
5 Bumper wheel
6 Splash guard
7 Front steering motorwheel
8 Compartment for electric components
9 Steering wheel
Photo B
1 Blinker
2 Recovery water tank drain hose
3 Recovery water tank drain hose plug
4 Solution water tank filler plug
5 Suction hose
6 Rear cover of the suction compartment
Photo C
1 Blinker
2 Opening knob of the suction
compartment
3 Rear cover of the suction compartment
4 Suction motor compartment
5 Suction filter
Photo D
1 Solution water tank drain valve
Photo E
1 Squeegee bumper wheels
2 Squeegee pressure adjusting knob
3 Squeegee fast fixing knob
4 Squeegee inclination adjusting knob
5 Suction hose
6 Squeegee blades replacement knobs
7 Squeegee wheels
Photo F
1 Solution water filter
Photo G
1 Battery compartment with 6V batteries
2 Suction motor
3 On- board battery charger
Photo H
1 Chopper control board
2 Traction motor fuse
3 Suction motor fuse
4 Brush motor fuse
Photo I
1 Battery charger cover
2 Red LED - Battery discharged
3 Green LED - Full charged battery
4 Dip-Switches
5 Plastic cap to access the Dip-Switches
6 Dip-Switches for PB-Acid/GEL battery
setting
7 Table with Dip-Switch settings for
PB-Acid/GEL charging curve
Photo L1
1 Electromechanical brake fork lever
Photo L2
1 Unblocking lever
2 Pin
Photo L3 - L4 - L5
Electromechanical brake unblocking procedure
Photo M
1 Key switch
2 Traction speed increase push button
3 Traction speed reduce push button
4 Suction motor operating push button
Squeegee lifting/lowering
(XS-R/A13R UP-Kron Zero-R Plus)
5 Brush motor operating push button
Brush plate lifting/lowering
(XS-R/A13R UP-Kron Zero-R Plus)
6 Forward/reverse traction selector
7 Brush motor thermal breaker
8 Electric horn
9 Operating informations display