background image

 

Rudi Embedded System with NVIDIA Jetson TX2, TX2i or TX1  

Users Guide 

www.connecttech.com

 

 

Document: CTIM-00479 
Revision: 0.08 

 

 

Page 5 of 34 

Connect Tech Inc.  800-426-8979 | 519-836-1291

 

Date: 2019-04-08 

 

 

 

 
 

Limited Product Warranty 

 

Connect Tech Inc. provides a one year Warranty for the Rudi Embedded System.  Should this product, in 
Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. 
will, at its option, repair or replace this product at no charge, provided that the product has not been subjected 
to abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized modification or repair.

 

 
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business 
partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be 
pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the 
outside of the package and sent prepaid, insured and packaged for safe shipment.  Connect Tech Inc. will 
return this product by prepaid ground shipment service. 
 
The Connect Tech Inc. Limited Warranty is only valid over the serviceable life of the product. This is defined 
as the period during which all

 

components are available. Should the product prove to be irreparable, Connect 

Tech Inc. reserves the right to substitute an equivalent product if available or to retract the Warranty if no 
replacement is available. 
 
The above warranty is the only warranty authorized by Connect Tech Inc.  Under no circumstances will 
Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other 
incidental or consequential damages arising out of the use of, or inability to use, such product. 

 

Copyright Notice 

 

The information contained in this document is subject to change without notice.  Connect Tech Inc. shall not 
be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, 
performance, or use of this material.  This document contains proprietary information that is protected by 
copyright.  All rights are reserved.  No part of this document may be photocopied, reproduced, or translated to 
another language without the prior written consent of Connect Tech, Inc. 
 
Copyright 

 2017 by Connect Tech, Inc. 

 

Trademark Acknowledgment 

 
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this 
document as the property of their respective owners. Not listing all possible trademarks or copyright 
acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the trademarks and 
copyrights mentioned in this document. 

 

 

 

Summary of Contents for Rudi Embedded System Series



































Reviews: