10
GG-R
Specifications
Input Power:
+24 VDC, 300mA
Detection Principle:
Infrared
Detection Method:
Diffusion
Gases:
R22, R123, R125a, R134a, R402, R407, R404, R410,
R434, R448, R507 and many others
Contact Calibration Technologies for other gases.
Ranges:
0-500 ppm
0-1,000 ppm
0-3,000 ppm
Output Signal:
Linear 4/20 mA (max input impedance: 700 Ohms
)
Response Time:
T
50
= less than 60 seconds
T
90
= less than 90 seconds
Accuracy:
+/- 2% of full-scale
Resolution:
1% of full-scale
Zero Drift:
Less than 1% of full-scale per month, non-cumulative
Span Drift:
Less than 1% per month, non-cumulative
Linearity:
+/- 3% of full-scale
Repeatability:
+/- 1% of full-scale
Temperature Range:
-50°F to +120°F (-45°C to +49°C)
Humidity Range:
0% to 100% condensing
Wiring Connections:
3-conductor, shielded, stranded cable with drain wire:
Temperatures down to -10°F (max cable run):
1500 ft:18AWG cable (General Cable C2535A or equal)
Temperatures down to -40°F (max cable run):
800 ft: 18AWG cable (General Cable C2535A or equal)
130 ft: 16AWG cable (General Cable C2536A or equal)
1500 ft:14AWG cable (General Cable C2538A or equal)
Temperatures down to -50°F (max cable run):
50 ft: 16AWG cable (General Cable C2536A or equal)
80 ft: 14AWG cable (General Cable C2538A or equal)
Terminal Block Plug (Field Wiring):
26-12 AWG, torque 4.5 lbs-in.
Enclosure:
Injection-molded, NEMA 12 Washdown-Duty,
polycarbonate sensor housing with hinged lid and
captive screw. For non-classified areas.
Optional 18 GA, NEMA 3RX Washdown-Duty stainless
steel enclosure with hinged lid and captive screw. For
non-classified areas.
Dimensions:
7.5” high x 6.5” wide x 3.8” deep
Weight:
3 lbs
