CTI COM Express PMC/XMC Lite Carrier, User Manual

Page: 19 / 29

COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Document: CTIM-00440
Revision: 0.04
Page 19 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-09-11
HD Audio Connector
The CCG016s features HD Audio capabilities with the assistance of the Cirrus Logic CS4207 Codec device.
From the codec, 1 microphone input and 1 headphone output are available.
Function HD Audio
Location P5
Type FCI Minitek Double Row 4 x 2
P/N 98414-G06-08LF
Cable CBG118
Pinout
Pin Description Pin Description
1 - 2 -
3 MIC IN R 4 MIC IN L
5 GND 6 GND
7 HP OUT R 8 HP OUT L
Software Support for the CS4207
The audio codec used on the Qseven Gen 2.0 carrier board is the CS4207 from Cirrus Logic.
Additional drivers will be needed to properly operate audio on the Qseven Gen 2.0 carrier. Some downloadable
links can be found below.
Windows XP Driver : http://www.cirrus.com/en/pubs/software/CS4207_WinXP_1-0-0-38.zip
Windows 7/Vista Driver : http://www.cirrus.com/en/pubs/software/CS4207_WinVista_Win7_32-64-bit_6-
6001-1-30.zip
Linux Driver : Included in kernels 2.6.30 and up.
USB 2.0 Connector
The CCG016 has multiple USB Ports. USB 2.0 Port 6 is sourced directly from the COM Express module. USB
2.0 Port 7 however has multiple functionality options. Using Jumper J727, Port 7 can either be a Client USB,
or it can be used to connect the SD Card to the COM Express module.
Function USB 2.0 Ports 6 and 7
Location P2
Type FCI Minitek Double Row 4 x 2
P/N 98414-G06-08LF
Cable CBG104
Pinout
Pin Description Pin Description
1 PORT 6 - VBUS 2 PORT 7
– VBUS
[2]
3 PORT 6
– D-
4 PORT 7
– D-
[3]
5 PORT 6
– D+
6 PORT 7
– D+
[3]
7 PORT 6
– GND
8 PORT 7
– GND
Note [2]: USB 2.0 Port 7 can be optionally be used as client USB. Simply remove the Jumper from J8A to enable
Note [3]: USB 2.0 Port 7 can be optionally be used to enable the SD Card. Simply remove the Jumper from J8B to enable